Posts Tagged ‘ball screw linear actuator’
The Playstation 3 (a.k.a. PS3) is one of the strongest and well known gaming consoles out available on the market ideal now. Unfortunately, the fame isn’t going to appear with out a couple of flaws. The PS3 was built to be slick and exquisite ball screw repair, nonetheless it looks the exact variety of consideration to engineering wasn’t provided into the Playstation 3’s cooling capabilities. Certainly one of probably the most outstanding concerns with present day gaming consoles such as the Playstation three is the lack of ability to help keep by itself neat. When overheated, the Playstation three will not change on. Symptoms of this difficulty include things like the procedure “beeping” 3 periods along with a yellow flashing mild close to the on button. This PS3 concern is extremely cited because the “Yellow Light-weight of Death” or YLOD. Let us see what we can easily do to revive this high-priced paper fat back again to existence particularly when your warranty no more applies.
Very good information, a PS3 fix does exist! As being a matter of point, you can find a resolve for almost each challenge your Playstation may well come across down the road. On this page we’re going to look precisely at PS3 YLOD challenge that closely plagues initial as a result of 3rd era Playstation 3s (often called Body fat PS3 products).
Why Does the PS3 YLOD Happen?
Just one main reason (99% on the time) why your Playstaion three would expertise a YLOD is that if it had overheated. Overheating a PS3 would result in solder balls underneath the devices CPU and GPU to become brittle and crack. This is often on account of a style flaw during the Playstation three mainly because the console is unable to eliminate the heat that it is producing.
Do it On your own: PS3 YLOD Resolve
1x Playstation 3 with YLOD
1x 1500W industrial heatgun
1x Bottle of no-clean flux
1x Roll of masking tape
1x Tamper-proof T-screw driver
1x Phillips screwdriver
1x Heat resistant surface
1x Pack of cotton balls
1x Bottle of Acetone and Rubbing Liquor
1x Tube of thermal paste
Summary of Steps-
1) Shut down your Playstation three and ensure all ability cables are unplugged (Security initial!).
2) Remove the warranty seal found above the disk drive disk bay. Then make use of the tamper-proof T screwdriver eliminate the screw that retains the highest include into the PS3.
3) Using your Philips screwdriver remove each of the screws securing the very best shell of your PS3.
four) Thoroughly disassemble the detachable components (Electricity provide, Blue-ray push, Blue tooth board with wi-fi antenna, capacitance power swap, and also the HDD).]
5) Remove the screws securing the PS3’s motherboard. Get rid of the admirer and warmth sink and warmth sink shroud connected into the motherboard.
6) Applying the cotton balls soaked with acetone, thoroughly clean the thermal paste from CPU and warmth sink surfaces.
7) Tape motherboard down on a warmth resistant floor in order that it sits flat (enjoy about by using a corner of your floor to locate a great placement for that motherboard). Taping the PS3’s motherboard down will reduce it from warping beneath the warmth from the heatgun.
8) Applying the warmth gun’s low setting, heat up your complete motherboard (~3 minutes). Then use the no-clean flux under the CPU and GPU liberally.
9) Make use of the warmth gun’s large setting warmth the CPU and GPU up. Keep the heat gun about 1-2″ clear of the area with the PS3 motherboard, but transfer the heat gun within the chips continuously to prevent melt away harm (persist for ~8-10 minutes).
10) Allow for the motherboard to cool down for 20-30 minutes.
11) Reassemble the Playstation 3 to it is really primary issue (mindful to replace every screw and plug to its rightful place).
12) Plug the facility cord back again in and turn on the PS3.
If carried out properly, your Playstation three YLOD dilemma must be gone. This PS3 take care of really should consider one to 2 several hours based on your own ability with electronics. In the event you have to have an excellent more detailed, step-by-step restore walkthrough with photographs and every little thing make sure you appear towards the bottom of your report for a fantastic information which i use as well.
– Be sure your Playstation three is able in which it is actually nicely ventilated.
– Attempt never to leave your PS3 on for prolonged periods of time (even idle).
– Tend not to place the Playstation in close proximity to resources of dust (i.e carpets, floors, beds, and so forth)